Maxitrol Regulators

Maxitrol Regulators
  • 325-5AL : 1/2″, 3/4″ or 1″ : Standard or with Vent Limiter

    325-5AL : 1/2″, 3/4″ or 1″ : Standard or with Vent Limiter

    Available Sizes:
    1/2″, 3/4″ or 1″

    SPECS
    Capacity (BTU): 300000
    Size: 1″
    Capacity: 300000 BTU


    325 Series pounds to inches regulators are for use on residential, commercial, and industrial applications. The 325 Series features a high leverage valve linkage assembly to deliver positive dead-end lock-up. The regulators are capable of precise regulating control from full flow down to pilot flow. These regulators are suitable for natural, manufactured, mixed gases, liquefied petroleum gases, and LP gas-air mixtures.

    Note: This product is available for purchase with or without a vent limiter.

  • 325-5A : 1/2″, 3/4″, or 1″ : Standard or with Vent Limiter

    325-5A : 1/2″, 3/4″, or 1″ : Standard or with Vent Limiter

    Available Sizes:
    1/2″, 3/4″, or 1″

    SPECS
    Capacity (BTU): 300000
    Size: 1″
    Capacity: 300000 BTU


    325 Series pounds to inches regulators are for use on residential, commercial, and industrial applications. The 325 Series features a high leverage valve linkage assembly to deliver positive dead-end lock-up. The regulators are capable of precise regulating control from full flow down to pilot flow. These regulators are suitable for natural, manufactured, mixed gases, liquefied petroleum gases, and LP gas-air mixtures.

  • 325-3L : 3/8″ or 1/2″, Standard or with Vent Limiter

    325-3L : 3/8″ or 1/2″, Standard or with Vent Limiter

    Available Sizes:
    3/8″ or 1/2″

    SPECS:
    Capacity (BTU): 250000
    Size: 1/2″
    Capacity: 250000 BTU

    Note: This unit can be purchased with OR without a vent limiting device.

    325 Series pounds to inches regulators are for use on residential, commercial, and industrial applications. The 325 Series features a high leverage valve linkage assembly to deliver positive dead-end lock-up. The regulators are capable of precise regulating control from full flow down to pilot flow.


    The total load capacity of multiple appliances combined for this unit is 250,000 BTUs.
    The total load capacity of a single appliance served by this regulator is 140,000 BTUs.

  • 325-3 :  3/8″ or 1/2″, Standard or with Vent Limiter

    325-3 : 3/8″ or 1/2″, Standard or with Vent Limiter

    SPECS:
    Capacity (BTU): 140000
    Size: 1/2″
    Capacity: 140000 BTU

    Note: This unit can be purchased alone OR  with a vent limiting device.

    The 325 Series is a pounds to inches regulator, meeting utility specifications. The 325 Series regulator is for use on residential, commercial, and industrial applications where adequate inlet pressures are available.
    They are a high performance type regulator and can be used as a single stage regulator – reducing pounds pressure to normal burner pressure. They can also be used as a line regulator on equipment already fitted with an appliance regulator.

  • 210J 4″ FLGD

    210J 4″ FLGD

    SPECS:
    Size: 4″
    Capacity: 50000000 BTU
    Max Pressure (PSI): 10 psi
    Fuel Type: Natural Gas, Propane

    The 210 series is a lock-up type regulator and complies with codes using this specification.

    The 210 series has been designed for maximum control function in an easy to use package. The series is intended for use with gas-fired boilers, steam generators, industrial furnaces, ovens, and similar high demand equipment.

    The balanced valve design eliminates the inlet pressure effect acting on the valve. Regulating stability is improved and hunting tendencies reduced by the use of dampening mechanisms in both the breather outlet and sensing tube. You get precise regulation over a broad range of pressures and flow rates with the 210 series, including a “zero governor” application.

    Housings are of high strength aluminum alloy and are reinforced with webs for maximum strength. The 210J model is of cast iron and steel construction with 125 pound flange connections. Internal parts are cast or machined from corrosion resistant metals or electroplated.

  • 210G 2-1/2″ and 3″

    210G 2-1/2″ and 3″

    SPECS:
    Sizes: 2-1/2″, 3″
    Capacity: 26000000 BTU
    Max Pressure (PSI): 10 psi
    Fuel Type: Natural Gas, Propane

    The 210 series is a lock-up type regulator and complies with codes using this specification.

    The 210 series has been designed for maximum control function in an easy to use package. The series is intended for use with gas-fired boilers, steam generators, industrial furnaces, ovens, and similar high demand equipment.

    When selecting pipe size, make sure regulators are not more than one size smaller or larger than manifold pipe size. Gas flow must be oriented to arrow on the bottom casting. At exposures to maximum emergency levels, the regulator will suffer no internal damage, but it may provide accurate regulation. See Maxitrol’s “Spring Chart” under Manuals for complete selection of spring ranges on all models.