Maxitrol Regulators

Maxitrol Regulators
  • 210E 1-1/2″ and 2″

    210E 1-1/2″ and 2″

    SPECS:
    Sizes: 1-1/2″, 2″
    Capacity: 12000000 BTU
    Max Pressure (PSI): 10 psi
    Fuel Type: Natural Gas, Propane

    The 210 series is a lock-up type regulator and complies with codes using this specification.

    The 210 series has been designed for maximum control function in an easy to use package. The series is intended for use with gas-fired boilers, steam generators, industrial furnaces, ovens, and similar high demand equipment.

    When selecting pipe size, make sure regulators are not more than one size smaller or larger than manifold pipe size. Gas flow must be oriented to arrow on the bottom casting. At exposures to maximum emergency levels, the regulator will suffer no internal damage, but it may provide accurate regulation. See Maxitrol’s “Spring Chart” under Manuals for complete selection of spring ranges on all models.

    Convenient tap locations are provided for downstream sensing, cross connections, and differential control. Four locations can be tapped and plugged for measuring pressure.

  • 210D 1″, 1-1/4″, and 1-1/2

    210D 1″, 1-1/4″, and 1-1/2

    SPECS:
    Sizes: 1″, 1-1/4″, 1-1/2″
    Capacity: 65000000 BTU
    Max Pressure: 10 psi
    Fuel Type: Natural Gas, Propane

    The 210 series is a lock-up type regulator and complies with codes using this specification.
    The 210 series has been designed for maximum control function in an easy to use package. The series is intended for use with gas-fired boilers, steam generators, industrial furnaces, ovens, and similar high demand equipment.

    The balanced valve design eliminates the inlet pressure effect acting on the valve. Regulating stability is improved and hunting tendencies reduced by the use of dampening mechanisms in both the breather outlet and sensing tube. You get precise regulation over a broad range of pressures and flow rates with the 210 series, including a “zero governor” application.

  • Vent Protectors

    Vent Protectors

    Available Models:
    13A15
    • intended for 1/8″ NPT vent
    • For outdoor use on 325-3 or 325-3L
    13A15-5
    • intended for 3/8″ NPT vent
    • For outdoor use on 325-5A and 325-5AL
    13A25
    • intended for 1/2″ NPT vent
    •For outdoor use on 325-7A and 325-7AL

    ALL MODELS:
    • Designed for outdoor applications.
    • Use on vent opening to protect breather hole from rain, snow, foreign particles and insects.
    • Vent protector MUST be mounted in an upright position.
    • NOT a vent limiting device

  • Vent Limiters

    Vent Limiters

    Abailable Models:
    • 12A09
    For use on: 325-3, 325-3L, 325-3L47 (regulators only), 325-3L48 (regulators & OPD), 325-5AL48 (OPD only), 325-5AL600 (OPD only)
    • 12A39
    • 12A49
    For use on 325-7

    A vent limiting orifice or device when used with Maxitrol regulators does not release or relieve gas into the environment during normal operation.
    Vent limiters are designed for use indoors and in spaces where limiting the amount of gas escapement due to diaphragm failure is critical. Vent limiters should not be used outdoors if they are exposed to the environment.

  • 12A39  Vent Limiter

    12A39 Vent Limiter